Download FCP-FortiAnalyzer 7.4 Administrator.FCP_FAZ_AD-7.4.PassLeader.2025-02-28.61q.vcex

Vendor: Fortinet
Exam Code: FCP_FAZ_AD-7.4
Exam Name: FCP-FortiAnalyzer 7.4 Administrator
Date: Feb 28, 2025
File Size: 39 KB
Downloads: 4

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

ProfExam Discount

Demo Questions

Question 1
If a hard disk fails on a FortiAnalyzer that supports software RAID, what should you do to bring the FortiAnalyzer back to functioning normally, without losing data? 
  1. Hot swap the disk. 
  2. Replace the disk and rebuild the RAID manually. 
  3. Take no action if the RAID level supports a failed disk. 
  4. Shut down FortiAnalyzer and replace the disk. 
Correct answer: D
Explanation:
If a hard disk on a FortiAnalyzer unit fails, it must be replaced. On FortiAnalyzer devices that support hardware RAID, the hard disk can be replaced while the unit is still running-known as hot swapping. On FortiAnalyzer units with software RAID, the device must be shutdown prior to exchanging the hard disk. 
If a hard disk on a FortiAnalyzer unit fails, it must be replaced. On FortiAnalyzer devices that support hardware RAID, the hard disk can be replaced while the unit is still running-known as hot swapping. On FortiAnalyzer units with software RAID, the device must be shutdown prior to exchanging the hard disk. 
Question 2
When generating reports on FortiAnalyzer, macros can be used to include additional data. Which two statements about macros are true? (Choose two.) 
  1. Macros are abbreviated dataset queries. 
  2. Macros do not need to be associated with a chart. 
  3. Macros are supported in FortiGate ADOMs only. 
  4. Macros cannot be customized. 
Correct answer: AB
Question 3
Logs are being deleted from one of your ADOMs earlier that the configured setting for archiving in your data policy. What is the most likely problem? 
  1. The total disk space is insufficient and you need to add other disk. 
  2. CPU resources are too high. 
  3. The ADOM disk quota is set too low based on log rates. 
  4. Logs in that ADOM are being forwarded in real-time to another FortiAnalyzer device. 
Correct answer: C
Question 4
What remote authentication servers can you configure to validate your FortiAnalyzer administrator logons? (Choose three.) 
  1. RADIUS 
  2. Local 
  3. LDAP 
  4. PKI 
  5. TACACS+ 
Correct answer: ACE
Question 5
What are the operating modes of FortiAnalyzer? (Choose two.) 
  1. Standalone 
  2. Manager 
  3. Analyzer 
  4. Collector 
Correct answer: CD
Question 6
Which clause is considered mandatory in SELECT statements used by the FortiAnalyzer to generate reports? 
  1. FROM 
  2. LIMIT 
  3. WHERE 
  4. ORDER BY 
Correct answer: A
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD48500 
https://kb.fortinet.com/kb/documentLink.do?externalID=FD48500 
Question 7
Which two statements express the advantages of grouping similar reports? (Choose two.) 
  1. Improve report completion time. 
  2. Conserve disk space on FortiAnalyzer by grouping multiple similar reports. 
  3. Reduce the number of hcache tables and improve auto-hcache completion time. 
  4. Provides a better summary of reports. 
Correct answer: AC
Question 8
Which two statement are true regardless initial Logs sync and Log Data Sync for Ha on FortiAnalyzer? 
  1. By default, Log Data Sync is disabled on all backup devise. 
  2. Log Data Sync provides real-time log synchronization to all backup devices. 
  3. With initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device. 
  4. When Logs Data Sync is turned on, the backup device will reboot and then rebuilt the log database with the synchronized logs. 
Correct answer: CD
Question 9
Which two statements about a FortiAnalyzer Fabric are true? (Choose two.) 
  1. Fabric members must be in the same time zone as the supervisor. 
  2. Fabric members and the supervisor support HA. 
  3. All fabric members must run in collector mode except the supervisor. 
  4. The supervisor can access the logs in the fabric members using an API. 
Correct answer: AD
Explanation:
All FortiAnalyzer Fabric members must be configured with the same time zone settings as the supervisor. The Supervisor can view the information on the members via an API. 
All FortiAnalyzer Fabric members must be configured with the same time zone settings as the supervisor. The Supervisor can view the information on the members via an API. 
Question 10
What is the purpose of output variables? 
  1. To store playbook execution statistics. 
  2. To use the output of the previous task as the input of the current task. 
  3. To display details of the connectors used by a playbook. 
  4. To save all the task settings when a playbook is exported. 
Correct answer: B
Explanation:
Output variables allow you to use the output from a preceding task as an input to the current task. 
Output variables allow you to use the output from a preceding task as an input to the current task. 
Question 11
Which two statements are correct regarding the export and import of playbooks? (Choose two.) 
  1. You can export only one playbook at a time. 
  2. You can import a playbook even if there is another one with the same name in the destination. 
  3. Playbooks can be exported and imported only within the same FortiAnaryzer. 
  4. A playbook that was disabled when it was exported, will be disabled when it is imported. 
Correct answer: BD
Explanation:
Option B: If the imported playbook has the same name as an existing one, FortiAnalyzer will create a new name that includes a timestamp to avoid conflicts. Option D: Playbooks are imported with the same status they had (enabled or disabled) when they were exported. Playbooks set to run automatically should be exported while they are disabled to avoid unintended runs on the destination. 
  • Option B: If the imported playbook has the same name as an existing one, FortiAnalyzer will create a new name that includes a timestamp to avoid conflicts. 
  • Option D: Playbooks are imported with the same status they had (enabled or disabled) when they were exported. Playbooks set to run automatically should be exported while they are disabled to avoid unintended runs on the destination. 
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!